-- megafunction wizard: %RAM: 2-PORT% -- GENERATION: STANDARD -- VERSION: WM1.0 -- MODULE: altsyncram -- ============================================================ -- File Name: fir_sample_buffer.vhd -- Megafunction Name(s): -- altsyncram -- -- Simulation Library Files(s): -- altera_mf -- ============================================================ -- ************************************************************ -- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! -- -- 23.1std.1 Build 993 05/14/2024 SC Lite Edition -- ************************************************************ --Copyright (C) 2024 Intel Corporation. All rights reserved. --Your use of Intel Corporation's design tools, logic functions --and other software and tools, and any partner logic --functions, and any output files from any of the foregoing --(including device programming or simulation files), and any --associated documentation or information are expressly subject --to the terms and conditions of the Intel Program License --Subscription Agreement, the Intel Quartus Prime License Agreement, --the Intel FPGA IP License Agreement, or other applicable license --agreement, including, without limitation, that your use is for --the sole purpose of programming logic devices manufactured by --Intel and sold by Intel or its authorized distributors. Please --refer to the applicable agreement for further details, at --https://fpgasoftware.intel.com/eula. LIBRARY ieee; USE ieee.std_logic_1164.all; LIBRARY altera_mf; USE altera_mf.altera_mf_components.all; ENTITY fir_sample_buffer IS PORT ( address_a : IN STD_LOGIC_VECTOR (10 DOWNTO 0); address_b : IN STD_LOGIC_VECTOR (10 DOWNTO 0); clock : IN STD_LOGIC := '1'; data_a : IN STD_LOGIC_VECTOR (15 DOWNTO 0); data_b : IN STD_LOGIC_VECTOR (15 DOWNTO 0); wren_a : IN STD_LOGIC := '0'; wren_b : IN STD_LOGIC := '0'; q_a : OUT STD_LOGIC_VECTOR (15 DOWNTO 0); q_b : OUT STD_LOGIC_VECTOR (15 DOWNTO 0) ); END fir_sample_buffer; ARCHITECTURE SYN OF fir_sample_buffer IS SIGNAL sub_wire0 : STD_LOGIC_VECTOR (15 DOWNTO 0); SIGNAL sub_wire1 : STD_LOGIC_VECTOR (15 DOWNTO 0); BEGIN q_a <= sub_wire0(15 DOWNTO 0); q_b <= sub_wire1(15 DOWNTO 0); altsyncram_component : altsyncram GENERIC MAP ( address_reg_b => "CLOCK0", clock_enable_input_a => "BYPASS", clock_enable_input_b => "BYPASS", clock_enable_output_a => "BYPASS", clock_enable_output_b => "BYPASS", indata_reg_b => "CLOCK0", intended_device_family => "MAX 10", lpm_type => "altsyncram", numwords_a => 2048, numwords_b => 2048, operation_mode => "BIDIR_DUAL_PORT", outdata_aclr_a => "NONE", outdata_aclr_b => "NONE", outdata_reg_a => "CLOCK0", outdata_reg_b => "CLOCK0", power_up_uninitialized => "FALSE", read_during_write_mode_mixed_ports => "DONT_CARE", read_during_write_mode_port_a => "NEW_DATA_WITH_NBE_READ", read_during_write_mode_port_b => "NEW_DATA_WITH_NBE_READ", widthad_a => 11, widthad_b => 11, width_a => 16, width_b => 16, width_byteena_a => 1, width_byteena_b => 1, wrcontrol_wraddress_reg_b => "CLOCK0" ) PORT MAP ( address_a => address_a, address_b => address_b, clock0 => clock, data_a => data_a, data_b => data_b, wren_a => wren_a, wren_b => wren_b, q_a => sub_wire0, q_b => sub_wire1 ); END SYN; -- ============================================================ -- CNX file retrieval info -- ============================================================ -- Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0" -- Retrieval info: PRIVATE: ADDRESSSTALL_B NUMERIC "0" -- Retrieval info: PRIVATE: BYTEENA_ACLR_A NUMERIC "0" -- Retrieval info: PRIVATE: BYTEENA_ACLR_B NUMERIC "0" -- Retrieval info: PRIVATE: BYTE_ENABLE_A NUMERIC "0" -- Retrieval info: PRIVATE: BYTE_ENABLE_B NUMERIC "0" -- Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8" -- Retrieval info: PRIVATE: BlankMemory NUMERIC "1" -- Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "0" -- Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_B NUMERIC "0" -- Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0" -- Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_B NUMERIC "0" -- Retrieval info: PRIVATE: CLRdata NUMERIC "0" -- Retrieval info: PRIVATE: CLRq NUMERIC "0" -- Retrieval info: PRIVATE: CLRrdaddress NUMERIC "0" -- Retrieval info: PRIVATE: CLRrren NUMERIC "0" -- Retrieval info: PRIVATE: CLRwraddress NUMERIC "0" -- Retrieval info: PRIVATE: CLRwren NUMERIC "0" -- Retrieval info: PRIVATE: Clock NUMERIC "0" -- Retrieval info: PRIVATE: Clock_A NUMERIC "0" -- Retrieval info: PRIVATE: Clock_B NUMERIC "0" -- Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0" -- Retrieval info: PRIVATE: INDATA_ACLR_B NUMERIC "0" -- Retrieval info: PRIVATE: INDATA_REG_B NUMERIC "1" -- Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_A" -- Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0" -- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "MAX 10" -- Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0" -- Retrieval info: PRIVATE: JTAG_ID STRING "NONE" -- Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0" -- Retrieval info: PRIVATE: MEMSIZE NUMERIC "32768" -- Retrieval info: PRIVATE: MEM_IN_BITS NUMERIC "1" -- Retrieval info: PRIVATE: MIFfilename STRING "" -- Retrieval info: PRIVATE: OPERATION_MODE NUMERIC "3" -- Retrieval info: PRIVATE: OUTDATA_ACLR_B NUMERIC "0" -- Retrieval info: PRIVATE: OUTDATA_REG_B NUMERIC "1" -- Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0" -- Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_MIXED_PORTS NUMERIC "2" -- Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_A NUMERIC "4" -- Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_B NUMERIC "4" -- Retrieval info: PRIVATE: REGdata NUMERIC "1" -- Retrieval info: PRIVATE: REGq NUMERIC "1" -- Retrieval info: PRIVATE: REGrdaddress NUMERIC "0" -- Retrieval info: PRIVATE: REGrren NUMERIC "0" -- Retrieval info: PRIVATE: REGwraddress NUMERIC "1" -- Retrieval info: PRIVATE: REGwren NUMERIC "1" -- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0" -- Retrieval info: PRIVATE: USE_DIFF_CLKEN NUMERIC "0" -- Retrieval info: PRIVATE: UseDPRAM NUMERIC "1" -- Retrieval info: PRIVATE: VarWidth NUMERIC "0" -- Retrieval info: PRIVATE: WIDTH_READ_A NUMERIC "16" -- Retrieval info: PRIVATE: WIDTH_READ_B NUMERIC "16" -- Retrieval info: PRIVATE: WIDTH_WRITE_A NUMERIC "16" -- Retrieval info: PRIVATE: WIDTH_WRITE_B NUMERIC "16" -- Retrieval info: PRIVATE: WRADDR_ACLR_B NUMERIC "0" -- Retrieval info: PRIVATE: WRADDR_REG_B NUMERIC "1" -- Retrieval info: PRIVATE: WRCTRL_ACLR_B NUMERIC "0" -- Retrieval info: PRIVATE: enable NUMERIC "0" -- Retrieval info: PRIVATE: rden NUMERIC "0" -- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all -- Retrieval info: CONSTANT: ADDRESS_REG_B STRING "CLOCK0" -- Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "BYPASS" -- Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_B STRING "BYPASS" -- Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_A STRING "BYPASS" -- Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_B STRING "BYPASS" -- Retrieval info: CONSTANT: INDATA_REG_B STRING "CLOCK0" -- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "MAX 10" -- Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram" -- Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "2048" -- Retrieval info: CONSTANT: NUMWORDS_B NUMERIC "2048" -- Retrieval info: CONSTANT: OPERATION_MODE STRING "BIDIR_DUAL_PORT" -- Retrieval info: CONSTANT: OUTDATA_ACLR_A STRING "NONE" -- Retrieval info: CONSTANT: OUTDATA_ACLR_B STRING "NONE" -- Retrieval info: CONSTANT: OUTDATA_REG_A STRING "CLOCK0" -- Retrieval info: CONSTANT: OUTDATA_REG_B STRING "CLOCK0" -- Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE" -- Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_MIXED_PORTS STRING "DONT_CARE" -- Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_PORT_A STRING "NEW_DATA_WITH_NBE_READ" -- Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_PORT_B STRING "NEW_DATA_WITH_NBE_READ" -- Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "11" -- Retrieval info: CONSTANT: WIDTHAD_B NUMERIC "11" -- Retrieval info: CONSTANT: WIDTH_A NUMERIC "16" -- Retrieval info: CONSTANT: WIDTH_B NUMERIC "16" -- Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1" -- Retrieval info: CONSTANT: WIDTH_BYTEENA_B NUMERIC "1" -- Retrieval info: CONSTANT: WRCONTROL_WRADDRESS_REG_B STRING "CLOCK0" -- Retrieval info: USED_PORT: address_a 0 0 11 0 INPUT NODEFVAL "address_a[10..0]" -- Retrieval info: USED_PORT: address_b 0 0 11 0 INPUT NODEFVAL "address_b[10..0]" -- Retrieval info: USED_PORT: clock 0 0 0 0 INPUT VCC "clock" -- Retrieval info: USED_PORT: data_a 0 0 16 0 INPUT NODEFVAL "data_a[15..0]" -- Retrieval info: USED_PORT: data_b 0 0 16 0 INPUT NODEFVAL "data_b[15..0]" -- Retrieval info: USED_PORT: q_a 0 0 16 0 OUTPUT NODEFVAL "q_a[15..0]" -- Retrieval info: USED_PORT: q_b 0 0 16 0 OUTPUT NODEFVAL "q_b[15..0]" -- Retrieval info: USED_PORT: wren_a 0 0 0 0 INPUT GND "wren_a" -- Retrieval info: USED_PORT: wren_b 0 0 0 0 INPUT GND "wren_b" -- Retrieval info: CONNECT: @address_a 0 0 11 0 address_a 0 0 11 0 -- Retrieval info: CONNECT: @address_b 0 0 11 0 address_b 0 0 11 0 -- Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0 -- Retrieval info: CONNECT: @data_a 0 0 16 0 data_a 0 0 16 0 -- Retrieval info: CONNECT: @data_b 0 0 16 0 data_b 0 0 16 0 -- Retrieval info: CONNECT: @wren_a 0 0 0 0 wren_a 0 0 0 0 -- Retrieval info: CONNECT: @wren_b 0 0 0 0 wren_b 0 0 0 0 -- Retrieval info: CONNECT: q_a 0 0 16 0 @q_a 0 0 16 0 -- Retrieval info: CONNECT: q_b 0 0 16 0 @q_b 0 0 16 0 -- Retrieval info: GEN_FILE: TYPE_NORMAL fir_sample_buffer.vhd TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL fir_sample_buffer.inc FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL fir_sample_buffer.cmp TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL fir_sample_buffer.bsf FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL fir_sample_buffer_inst.vhd FALSE -- Retrieval info: LIB_FILE: altera_mf