Project

General

Profile

Actions
Copy link

Support #23

closed

No image

Added by jozsef over 7 years ago. Updated over 7 years ago.

Status:
Closed
Priority:
Normal
Assignee:
jozsef
Start date:
05/31/2017
Due date:
% Done:

0%

Estimated time:

Description

- the vga connector produces 15KHz, of which the monitor doesn't support
- through the HDMI connector I see "No SIGNAL" on the monitor

All the three power leds are shining.

Actions
Copy link
 #1

Updated by foft over 7 years ago

http://www.64kib.com/autobuild/private/settings_examples/

See the readme in here.

Please flash v8 too

Actions
Copy link
 #2

Updated by foft over 7 years ago

Panos posted an sd card image in the forum. I expect that is set up for 50Hz vga.

Actions
Copy link
 #3

Updated by jozsef over 7 years ago

The current firmware doesn't use this file. Need to order a cable to update the firmware.

Actions
Copy link
 #4

Updated by jozsef over 7 years ago

My bad: the card was NTSC formatted.
The old firmware reads "settings" too. Now I see the monitor recognizes the resolution/frequency, but I see a black screen only.
Reporting back, when my altera cable arrives from china.

Actions
Copy link
 #5

Updated by ndary over 7 years ago

copy this to the ROOT of your SD CARD

http://www.64kib.com/redmine/attachments/download/44/SDCARD.zip

Nir

Actions
Copy link
 #6

Updated by jozsef over 7 years ago

Thanks! It works now!
Start reading the http://www.64kib.com/redmine/attachments/download/7/Atari%20800%20FPGA%20Manual.pdf :)

Thanks for your support!

Actions
Copy link
 #7

Updated by foft over 7 years ago

  • Status changed from New to Closed
Actions
Copy link

Also available in: Atom PDF