Flashing using the USB blaster » History » Version 2
foft, 05/27/2018 07:12 PM
| 1 | 1 | foft | h1. Flashing using the USB blaster |
|---|---|---|---|
| 2 | |||
| 3 | Its possible to flash the .sof using the USB blaster, but this only lasts until the board is restarted. |
||
| 4 | To do this: |
||
| 5 | #Connect power to the board |
||
| 6 | #Connect the jtag |
||
| 7 | #In quartus go to tools->programmer |
||
| 8 | #In the programmer select 'add file' and choose the .sof file |
||
| 9 | #Tell it to start |
||
| 10 | |||
| 11 | To store on the flash chip you need to make a .jic file. The v1 board has a chip compatible with the EPCQ128. The v3 board has a chip compatible with the EPCS128. |