Wiki » History » Revision 45
Revision 44 (foft, 05/27/2018 07:42 PM) → Revision 45/58 (foft, 05/27/2018 07:42 PM)
h1. Introduction For now please see the general core manual on the main page. This was written for other boards and has not been updated for the EclaireXL, but the background is useful. http://www.64kib.com/ h1. Power requirements USB B 5V input. 500mA is enough but I'd go with 1-2A to give some extra for any connected devices. [[Known good power supplies]] h1. Board setup videos I put together some basic videos for the v2 boards: https://www.youtube.com/playlist?list=PLYGeDt6lv-p5R4DwdcHtmYUbfL6lOcYLb h1. SD card setup The OS and basic rom are loaded from the flash chip in the new cores, this can still be overridden by the sd card as discussed here: http://www.64kib.com/redmine/boards/1/topics/22?r=26#message-26 h1. Updating the core [[Flashing overview]] [[Core location]] [[Flashing using the USB blaster]] [[Flashing using the SD card]] [[Converting flashing files]] h1. Board information [[Pinouts]] [[Svideo/Composite]] [[Svideo and Composite] [[V2Issues]] h1. Cases In theory any mini ITX case should work as long as it has a full size IO panel. In practice, please check this list of [[known good cases]]. If you have success with another one, please add it. h1. Keyboard mapping The keyboard is mapped to match the standard Atari keyboard layout. It assumes you are using either an ISO or ANSI keyboard. I highly recommend buying stickers from here: https://www.4keyboard.com/commodore/591-2840-commodore-atari-non-transparent-keyboard-stickers.html For an ISO keyboard: !http://www.64kib.com/autobuild/keyboard.JPG!