Wiki » History » Revision 54
Revision 53 (foft, 05/28/2018 09:26 PM) → Revision 54/58 (foft, 06/02/2018 10:07 PM)
h1. Introduction
For now please see the general core manual on the main page. This was written for other boards and has not been updated for the EclaireXL, but the background is useful.
http://www.64kib.com/
h1. Power requirements
USB B 5V input. 500mA is enough but I'd go with 1-2A to give some extra for any connected devices.
[[Known good power supplies]]
h1. Board setup videos
I put together some basic videos for the v2 boards:
https://www.youtube.com/playlist?list=PLYGeDt6lv-p5R4DwdcHtmYUbfL6lOcYLb
Note that the firmware has been significantly developed since then, so some of the menus differ. It is now also possible to store settings on the flash and not use the SD card.
h1. SD card setup
The OS and basic rom are loaded from the flash chip in the new cores, this can still be overridden by the sd card as discussed here:
http://www.64kib.com/redmine/boards/1/topics/22?r=26#message-26
For more details see [[SD structure]]
h1. Updating the core
[[Flashing overview]]
[[Core location]]
[[Flashing using the USB blaster]]
[[Flashing using the SD card]]
[[Converting flashing files]]
[[Flash chip by board]]
h1. Board information
[[Pinouts]]
[[V2Issues]]
h1. Video modes
The EclaireXL support a wide variety of video output.
[[Video modes Overview]]
[[Video modes control picture]]
h1. Cases
In theory any mini ITX case should work as long as it has a full size IO panel.
In practice, please check this list of [[known good cases]]. If you have success with another one, please add it.
h1. Keyboard
The EclaireXL has USB ports for keyboard and game controllers (in addition to the DB9 ports). There is no native Atari keyboard port (though the GPIOs could be used) so you will have to use a PC style USB keyboard. See below for details of how the keys are mapped, since it may not be what you are expecting!
[[Keyboard mapping]]