-- megafunction wizard: %GPIO Lite Intel FPGA IP v23.1%
-- GENERATION: XML
-- paddle_gpio.vhd

-- Generated using ACDS version 23.1 993

library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;

entity paddle_gpio is
	port (
		dout     : out   std_logic_vector(7 downto 0);                    --     dout.export
		din      : in    std_logic_vector(7 downto 0) := (others => '0'); --      din.export
		pad_io   : inout std_logic_vector(7 downto 0) := (others => '0'); --   pad_io.export
		pad_io_b : inout std_logic_vector(7 downto 0) := (others => '0'); -- pad_io_b.export
		oe       : in    std_logic_vector(7 downto 0) := (others => '0')  --       oe.export
	);
end entity paddle_gpio;

architecture rtl of paddle_gpio is
	component altera_gpio_lite is
		generic (
			PIN_TYPE                                 : string  := "output";
			SIZE                                     : integer := 4;
			REGISTER_MODE                            : string  := "bypass";
			BUFFER_TYPE                              : string  := "single-ended";
			ASYNC_MODE                               : string  := "none";
			SYNC_MODE                                : string  := "none";
			BUS_HOLD                                 : string  := "false";
			OPEN_DRAIN_OUTPUT                        : string  := "false";
			ENABLE_OE_PORT                           : string  := "false";
			ENABLE_NSLEEP_PORT                       : string  := "false";
			ENABLE_CLOCK_ENA_PORT                    : string  := "false";
			SET_REGISTER_OUTPUTS_HIGH                : string  := "false";
			INVERT_OUTPUT                            : string  := "false";
			INVERT_INPUT_CLOCK                       : string  := "false";
			USE_ONE_REG_TO_DRIVE_OE                  : string  := "false";
			USE_DDIO_REG_TO_DRIVE_OE                 : string  := "false";
			USE_ADVANCED_DDR_FEATURES                : string  := "false";
			USE_ADVANCED_DDR_FEATURES_FOR_INPUT_ONLY : string  := "false";
			ENABLE_OE_HALF_CYCLE_DELAY               : string  := "true";
			INVERT_CLKDIV_INPUT_CLOCK                : string  := "false";
			ENABLE_PHASE_INVERT_CTRL_PORT            : string  := "false";
			ENABLE_HR_CLOCK                          : string  := "false";
			INVERT_OUTPUT_CLOCK                      : string  := "false";
			INVERT_OE_INCLOCK                        : string  := "false";
			ENABLE_PHASE_DETECTOR_FOR_CK             : string  := "false"
		);
		port (
			dout            : out   std_logic_vector(7 downto 0);                    -- export
			din             : in    std_logic_vector(7 downto 0) := (others => 'X'); -- export
			pad_io          : inout std_logic_vector(7 downto 0) := (others => 'X'); -- export
			pad_io_b        : inout std_logic_vector(7 downto 0) := (others => 'X'); -- export
			oe              : in    std_logic_vector(7 downto 0) := (others => 'X'); -- export
			inclocken       : in    std_logic                    := 'X';             -- export
			outclocken      : in    std_logic                    := 'X';             -- export
			inclock         : in    std_logic                    := 'X';             -- export
			fr_clock        : out   std_logic_vector(7 downto 0);                    -- export
			hr_clock        : out   std_logic;                                       -- export
			invert_hr_clock : in    std_logic                    := 'X';             -- export
			outclock        : in    std_logic                    := 'X';             -- export
			phy_mem_clock   : in    std_logic                    := 'X';             -- export
			mimic_clock     : out   std_logic_vector(7 downto 0);                    -- export
			pad_in          : in    std_logic_vector(7 downto 0) := (others => 'X'); -- export
			pad_in_b        : in    std_logic_vector(7 downto 0) := (others => 'X'); -- export
			pad_out         : out   std_logic_vector(7 downto 0);                    -- export
			pad_out_b       : out   std_logic_vector(7 downto 0);                    -- export
			aset            : in    std_logic                    := 'X';             -- export
			aclr            : in    std_logic                    := 'X';             -- export
			sclr            : in    std_logic                    := 'X';             -- export
			nsleep          : in    std_logic_vector(7 downto 0) := (others => 'X')  -- export
		);
	end component altera_gpio_lite;

begin

	paddle_gpio_inst : component altera_gpio_lite
		generic map (
			PIN_TYPE                                 => "bidir",
			SIZE                                     => 8,
			REGISTER_MODE                            => "bypass",
			BUFFER_TYPE                              => "pseudo_differential",
			ASYNC_MODE                               => "none",
			SYNC_MODE                                => "none",
			BUS_HOLD                                 => "false",
			OPEN_DRAIN_OUTPUT                        => "false",
			ENABLE_OE_PORT                           => "true",
			ENABLE_NSLEEP_PORT                       => "false",
			ENABLE_CLOCK_ENA_PORT                    => "false",
			SET_REGISTER_OUTPUTS_HIGH                => "false",
			INVERT_OUTPUT                            => "false",
			INVERT_INPUT_CLOCK                       => "false",
			USE_ONE_REG_TO_DRIVE_OE                  => "false",
			USE_DDIO_REG_TO_DRIVE_OE                 => "false",
			USE_ADVANCED_DDR_FEATURES                => "false",
			USE_ADVANCED_DDR_FEATURES_FOR_INPUT_ONLY => "false",
			ENABLE_OE_HALF_CYCLE_DELAY               => "true",
			INVERT_CLKDIV_INPUT_CLOCK                => "false",
			ENABLE_PHASE_INVERT_CTRL_PORT            => "false",
			ENABLE_HR_CLOCK                          => "false",
			INVERT_OUTPUT_CLOCK                      => "false",
			INVERT_OE_INCLOCK                        => "false",
			ENABLE_PHASE_DETECTOR_FOR_CK             => "false"
		)
		port map (
			dout            => dout,       --     dout.export
			din             => din,        --      din.export
			pad_io          => pad_io,     --   pad_io.export
			pad_io_b        => pad_io_b,   -- pad_io_b.export
			oe              => oe,         --       oe.export
			inclocken       => '1',        -- (terminated)
			outclocken      => '1',        -- (terminated)
			inclock         => '0',        -- (terminated)
			fr_clock        => open,       -- (terminated)
			hr_clock        => open,       -- (terminated)
			invert_hr_clock => '0',        -- (terminated)
			outclock        => '0',        -- (terminated)
			phy_mem_clock   => '0',        -- (terminated)
			mimic_clock     => open,       -- (terminated)
			pad_in          => "00000000", -- (terminated)
			pad_in_b        => "00000000", -- (terminated)
			pad_out         => open,       -- (terminated)
			pad_out_b       => open,       -- (terminated)
			aset            => '0',        -- (terminated)
			aclr            => '0',        -- (terminated)
			sclr            => '0',        -- (terminated)
			nsleep          => "00000000"  -- (terminated)
		);

end architecture rtl; -- of paddle_gpio
-- Retrieval info: <?xml version="1.0"?>
--<!--
--	Generated by Altera MegaWizard Launcher Utility version 1.0
--	************************************************************
--	THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--	************************************************************
--	Copyright (C) 1991-2024 Altera Corporation
--	Any megafunction design, and related net list (encrypted or decrypted),
--	support information, device programming or simulation file, and any other
--	associated documentation or information provided by Altera or a partner
--	under Altera's Megafunction Partnership Program may be used only to
--	program PLD devices (but not masked PLD devices) from Altera.  Any other
--	use of such megafunction design, net list, support information, device
--	programming or simulation file, or any other related documentation or
--	information is prohibited for any other purpose, including, but not
--	limited to modification, reverse engineering, de-compiling, or use with
--	any other silicon devices, unless such use is explicitly licensed under
--	a separate agreement with Altera or a megafunction partner.  Title to
--	the intellectual property, including patents, copyrights, trademarks,
--	trade secrets, or maskworks, embodied in any such megafunction design,
--	net list, support information, device programming or simulation file, or
--	any other related documentation or information provided by Altera or a
--	megafunction partner, remains with Altera, the megafunction partner, or
--	their respective licensors.  No other licenses, including any licenses
--	needed under any third party's intellectual property, are provided herein.
---->
-- Retrieval info: <instance entity-name="altera_gpio_lite" version="23.1" >
-- Retrieval info: 	<generic name="DEVICE_FAMILY" value="MAX 10" />
-- Retrieval info: 	<generic name="PIN_TYPE" value="bidir" />
-- Retrieval info: 	<generic name="SIZE" value="8" />
-- Retrieval info: 	<generic name="gui_true_diff_buf" value="false" />
-- Retrieval info: 	<generic name="gui_pseudo_diff_buf" value="true" />
-- Retrieval info: 	<generic name="gui_bus_hold" value="false" />
-- Retrieval info: 	<generic name="gui_open_drain" value="false" />
-- Retrieval info: 	<generic name="gui_enable_oe_port" value="false" />
-- Retrieval info: 	<generic name="gui_enable_nsleep_port" value="false" />
-- Retrieval info: 	<generic name="gui_io_reg_mode" value="bypass" />
-- Retrieval info: 	<generic name="gui_enable_aclr_port" value="false" />
-- Retrieval info: 	<generic name="gui_enable_aset_port" value="false" />
-- Retrieval info: 	<generic name="gui_enable_sclr_port" value="false" />
-- Retrieval info: 	<generic name="gui_set_registers_to_power_up_high" value="false" />
-- Retrieval info: 	<generic name="gui_clock_enable" value="false" />
-- Retrieval info: 	<generic name="gui_invert_output" value="false" />
-- Retrieval info: 	<generic name="gui_invert_input_clock" value="false" />
-- Retrieval info: 	<generic name="gui_use_register_to_drive_obuf_oe" value="false" />
-- Retrieval info: 	<generic name="gui_use_ddio_reg_to_drive_oe" value="false" />
-- Retrieval info: 	<generic name="gui_use_advanced_ddr_features" value="false" />
-- Retrieval info: 	<generic name="gui_enable_phase_detector_for_ck" value="false" />
-- Retrieval info: 	<generic name="gui_enable_oe_half_cycle_delay" value="true" />
-- Retrieval info: 	<generic name="gui_enable_hr_clock" value="false" />
-- Retrieval info: 	<generic name="gui_enable_invert_hr_clock_port" value="false" />
-- Retrieval info: 	<generic name="gui_invert_clkdiv_input_clock" value="false" />
-- Retrieval info: 	<generic name="gui_invert_output_clock" value="false" />
-- Retrieval info: 	<generic name="gui_invert_oe_inclock" value="false" />
-- Retrieval info: 	<generic name="gui_use_hardened_ddio_input_registers" value="false" />
-- Retrieval info: </instance>
-- IPFS_FILES : paddle_gpio.vho
-- RELATED_FILES: paddle_gpio.vhd, altera_gpio_lite.sv