Activity
From 02/25/2015 to 03/26/2015
03/26/2015
- 11:18 PM EclaireXL Revision 338 (repo2): Changed mem addresses
- 11:17 PM EclaireXL Revision 337 (repo2): The banks have a hole from 64k-256k, use this for the os rom, freeze and directory cache
- 11:04 PM EclaireXL Revision 336 (repo2): papilio duo support
- 11:03 PM EclaireXL Revision 335 (repo2): Switched DAC
- 09:55 PM EclaireXL Revision 334 (repo2): Aded papilio duo
- 09:55 PM EclaireXL Revision 333 (repo2): Added low memory type 2 - for papilio and its 512k
- 09:55 PM EclaireXL Revision 332 (repo2): Resync output to input hsync
- 09:54 PM EclaireXL Revision 331 (repo2): Added multiple build types
- 12:53 PM EclaireXL Revision 330 (repo2): Added 32 bit sram access to make zpu work
03/18/2015
- 11:07 PM EclaireXL Revision 329 (repo2): fixed ucf use
- 11:05 PM EclaireXL Revision 328 (repo2): sram works, boots, keyboard works
- 09:40 PM EclaireXL Revision 327 (repo2): Fixed PLL to more appropriate for PAL/NTSC with he 32MHz input clock. Should work now, although no ZPU yet!
- 09:18 PM EclaireXL Revision 326 (repo2): replacing with pal/ntsc plls of correct input frequency
03/17/2015
- 11:19 PM EclaireXL Revision 325 (repo2): First cut of papilio duo support. NB: This does not work yet, notably PLL needs changing. Then sram needs wiring up to allow zpu to run.
03/15/2015
- 04:08 PM EclaireXL Revision 324 (repo2): Added inferred multiplier
- 04:08 PM EclaireXL Revision 323 (repo2): EDBLL apparently works with lower drive strength - there are some crosstalk issues I read. Added GPIO lower drive strength. Removed 25ohm resistors.
- 04:03 PM EclaireXL Revision 322 (repo2): Now builds ok - disabled some features to fit in device. Also optimised pokey mixer.
- 04:00 PM EclaireXL Revision 321 (repo2): Space reduction to fit onto a Spartan 6 LX9. Allow disabling stereo and covox. Also replace pokey non-linear table with a piecewise linear function rather than a LUT
02/27/2015
- 07:51 AM EclaireXL Revision 320 (repo2): New GPIO layout for PBI implementation