64kib

08/01/2018

10:05 PM EclaireXL Bug #48 (Closed): CORE13 - Veronica BASIC not working

Closed. Working fine with my Veronica clone and no feedback received from tester. foft

10:02 PM EclaireXL Feature #3 (New): High resolution antic support

Paused until anyone uses it. If it starts getting used I might fix the offsets... foft

10:01 PM EclaireXL Bug #25 (New): F10 Hard Reset Ignore inserted cartridge (Core v7)

foft

10:01 PM EclaireXL Bug #64 (Closed): Pokey pdm timing incorrect

Found the issue when doing the pokeymax work - I'd lost some changes by accident. foft

10:00 PM EclaireXL Feature #72 (Closed): Implement stock Atari 400 mode

OK, so for all intents and purposes I think its the same. At least until we add the split bus for the 800... I added ... foft

09:58 PM EclaireXL Feature #68 (Closed): Implement stock Atari 800 mode

Great! Going to close this until I decide to add 2 bus support or you find a bug in it:-)
I mean the profiles. The... foft

08:16 PM EclaireXL Feature #68: Implement stock Atari 800 mode

OK, I built v27. This has a single floating data bus. I also updated the os rom in slot 4 to this one:
10 KB 0x0e86... foft

10:54 AM EclaireXL Feature #68: Implement stock Atari 800 mode

I guess it’s checking c000-cfff then?
I’ll try adding a floating data bus... foft

07:47 AM EclaireXL Feature #68: Implement stock Atari 800 mode

Did you load the original OS B or use the one off the jic? I think the one I included on the jic is patched. I should... foft

07:46 AM EclaireXL Feature #68: Implement stock Atari 800 mode

I’d better wire up the atx code so I can try it myself:) foft

08:28 PM EclaireXL Core v27

Small update to try to get some atx stuff working...
Single floating data bus: atari800 non-present ram and D1/D5/... foft

07/31/2018

10:30 PM EclaireXL Core v26

Atari800 mode fixes:
* Made no ram return 0xff, fixes 16k/32k boot since they were detecting a cartridge then crashi... foft

09:48 PM EclaireXL Feature #68: Implement stock Atari 800 mode

Fixed the beep on reset. Will build as v26. Not sure whether floating data bus if worth it. Looks like it wasn't even... foft

09:23 PM EclaireXL Feature #68: Implement stock Atari 800 mode

That worked... Now for that horrible beep on reset. foft

09:17 PM EclaireXL Feature #68: Implement stock Atari 800 mode

This is due to a brk being hit when it jumps to the cart to initialize it. Making the bus 0xff when no ram present wh... foft

08:32 PM EclaireXL Feature #68: Implement stock Atari 800 mode

Got signal tap on it. Gets part way through booting then hangs at address 000c. This is after memory detection itself... foft

07/28/2018

08:41 AM EclaireXL Feature #68: Implement stock Atari 800 mode

Tried the salt xex. If I boot it on 48k, then change ram to 16k/32k it returns the expected results. i.e. ram test pa... foft

07/27/2018

10:25 PM EclaireXL Core v25

A few fixes in pokey from when I was working on pokeymax.
Also the start of Atari 800 support. Some bugs still, be... foft

10:12 PM EclaireXL Feature #68: Implement stock Atari 800 mode

Built as v25 anyway in case anyone wants to play, but definitely more to do on this... foft

09:48 PM EclaireXL Feature #68: Implement stock Atari 800 mode

Squashed several bugs, but struggling with 16k and 32k mode for some reason, not booting. foft

07/25/2018

10:06 PM EclaireXL Feature #68: Implement stock Atari 800 mode

Got it booting again after a few small bug fixes.
Some reset issues on the 800... and it fails the XL banking acid... foft

09:27 PM EclaireXL Feature #68: Implement stock Atari 800 mode

OK, that sounds ... fun! It won't be expensive to add support for but I need to think about it.
For now I just wan... foft

09:03 PM EclaireXL Feature #68: Implement stock Atari 800 mode

@farb - do you know if the protection ever needs the floating data bus? For now I've set 0xc000 to either 0xff in <52... foft

08:57 PM EclaireXL Feature #68 (In Progress): Implement stock Atari 800 mode

Added Atari800 mode.
Ram selection dialog changed to system. Pressing fire toggles 800/xl/xe.
Only 16/32/48/52k sup... foft

07/22/2018

10:07 PM EclaireXL Feature #73: Implement ATX disk image support

Pleased to see it looks pretty simple, so we should be able to plug this in without too much pain. foft

10:05 PM EclaireXL Feature #73: Implement ATX disk image support

Ah, that makes more sense. The loadAtxSector seemed to be missing all the timing I was expecting, then I saw the phan... foft

09:08 PM EclaireXL Feature #73: Implement ATX disk image support

What is the basic interface?
If I receive a command packet, can I send it to the atx handling code and it returns ... foft

09:19 PM EclaireXL Bug #66 (Closed): Odd flash behaviour on new boards

I've received my board a few months ago and am unable to reproduce. Working fine as far as I can tell with the 64KB f... foft

09:16 PM EclaireXL PokeyMAX

I've spent some time this year working on a new FPGA board that fits into the original computer, to replace the pokey... foft

09:10 PM EclaireXL Feature #72: Implement stock Atari 400 mode

Are there any differences from the Atari800 mode? I guess 2 joystick ports. I guess also allowing less than 48K of ra... foft

07/12/2018

09:17 PM EclaireXL Developer: RE: SD Card

How did you get on with these? foft

09:17 PM EclaireXL Developer: RE: Built in sio2usb?

When you connect it to your pc does it find a new serial device? In device manager you can see which com port it assi... foft