Activity
From 03/29/2014 to 04/27/2014
04/26/2014
- 07:57 PM Revision 36 (repo2): Added os16_loop
- 07:49 PM Revision 35 (repo2): First version that boots with sdram
- 07:46 PM Revision 34 (repo2): Add an additional internal rom option - internal_rom=2, which for now just loops reading/writing 4 bytes. e.g. for testing new RAM setups
04/22/2014
- 09:55 PM Revision 33 (repo2): Final step of mcc216 build process - Windows only, appears to run in wine
- 09:54 PM Revision 32 (repo2): svideo code provided by the mcc216 team
- 08:37 PM Revision 31 (repo2): Re-connected SDRAM to DE1
04/16/2014
- 10:19 PM Revision 30 (repo2): Pass through video bigs
- 10:12 PM Revision 29 (repo2): Build all targets...
- 10:10 PM Revision 28 (repo2): Should never have been committed...
- 10:10 PM Revision 27 (repo2): Use video bits generic
- 10:10 PM Revision 26 (repo2): Use video bits generic
- 10:09 PM Revision 25 (repo2): Added video bits to generic, since I am having to adjust this everywhere.
- 10:07 PM Revision 24 (repo2): DE1 working with SRAM against common core. Plenty of features lost!
- 07:51 AM Revision 23 (repo2): Adjusted this based on mist settings - in the hope this will mean I need to tweak the phase offset less...
- 07:22 AM Revision 22 (repo2): Connected up SDRAM. Make 800XL core wait for SDRAM reset to complete. Also had to adjust phase offset to make it work - need to get a proper setup for mist
04/15/2014
- 08:11 PM Revision 21 (repo2): to_01 silenced sim, but caused build issues on Xilinx. If its invalid use 0
- 08:11 PM Revision 20 (repo2): to_01 silenced sim, but caused build issues. If its invalid use 0.
- 08:10 PM Revision 19 (repo2): Pass through some PBI signals needed for SDRAM
- 08:09 PM Revision 18 (repo2): Connected to new common core, built and working with sdram. Functionally should be as good as last replay release, but missing zpu entirely...
04/13/2014
- 10:38 PM Revision 17 (repo2): Removed unused file
- 10:37 PM Revision 16 (repo2): Wired up mist with internal ram/rom. Tested OK.
- 08:34 PM Revision 15 (repo2): Wired up helloworld example to mcc216. Works!
- 08:33 PM Revision 14 (repo2): Remove these, they are now common components.
- 08:32 PM Revision 13 (repo2): Expose pots, lightpen. Fix joystick bit ordering comments.
- 08:30 PM Revision 12 (repo2): added ps2_keys_reg to sensitivity list (was missing)
- 08:30 PM Revision 11 (repo2): Split ROM into its own process, to make it easier for Quartus to infer
- 08:29 PM Revision 10 (repo2): Split up into 2 sections. Quartus will not infer the ram block with it mixed
- 08:29 PM Revision 9 (repo2): Clock pause by pokey enable, so its a fixed speed even if system clock 28MHz,57MHz or otherwise
04/05/2014
- 10:01 PM Revision 8 (repo2): Renamed poly_* to pokey_poly_* since it is part of pokey
- 09:54 PM Revision 7 (repo2): Cleaned up ZPU into slightly more generic form, though still clearly atari core targetted. Added inital tb, though needs rom to verify more. MIST sector side removed, but should be possible with external changes. Now ZPU instead has lots of GPIO.
- 10:03 AM Revision 6 (repo2): Allow palette selection - with one option GTIA direct to allow external scandouble (with less memory)
- 09:53 AM Revision 5 (repo2): Renamed sim script to match
- 09:52 AM Revision 4 (repo2): Compiled/ran helloworld in sim. Appears fine...
04/03/2014
Also available in: Atom