EclaireXL

10/26/2014

10:27 PM Revision 225 (repo2): First 5200 stick now working - at least joystick + keypad

markw

10/22/2014

09:21 PM Revision 224 (repo2): SD card fixes, due to how spi_master released cs_n during command. Thanks Till!

markw

10/20/2014

10:45 PM Revision 223 (repo2): Pass s4_n,s5_n and cctl_n through 6502 timing adaptor. Only accept request at start of cycle.

markw

10/19/2014

10:49 PM Revision 222 (repo2): Started to connect up 5200 joystick. On mist this will work with keyboard + analog stick, or 5200daptor

markw

08:57 PM Revision 221 (repo2): Patches from Hias. Fix timing to allow The!Cart to work. Start of PBI work.

markw

10/18/2014

10:47 PM Revision 220 (repo2): Switched mist_5200 to use sd card emulation. NB SD cart emulation does not work yet with this core, but problem identified and Till will be fixing. Thanks Till!

markw

10:46 PM Revision 219 (repo2): Switched to new mmc code a while back, removing old

markw

10:42 PM Revision 218 (repo2): Add a newline, in case there is not a newline at the end of the file

markw

10/17/2014

11:01 PM Revision 217 (repo2): These were cross connected - no idea why it was building. SD init gets further now, but still no dice.

markw

08:12 AM Revision 216 (repo2): As discussed with Till - these were taken under Lesser

markw

08:08 AM Revision 215 (repo2): Changed mist to use simulated sd card, rather than the custom protocol

markw

10/16/2014

09:43 PM Revision 214 (repo2): Upgraded to latest version of Peter Wendrichs core. Thanks Peter!

markw

10/12/2014

10:17 PM Revision 213 (repo2): Fix replay build

markw

10/11/2014

11:34 AM Revision 212 (repo2): Fix PIA store. Checked freezer source, it expects it

markw

10:56 AM Revision 211 (repo2): Allow delete or scroll lock. I found scroll lock did not work on my mist - perhaps my kb

markw

09:55 AM Revision 210 (repo2): Merged turbo freezer support from Hias. Working pretty well. PIA freezing not working yet though, so no joystick after freeze. Scoll lock to freeze.

markw

10/08/2014

08:34 PM Revision 209 (repo2): Added some glue to talk to 6502 style bus with phi1/phi2 etc. Connected to GPIO including phi2 out. VBXE carts not running more reliably. In theory other carts such as The!Cart etc should work now, need to test...

markw

08:33 PM Revision 208 (repo2): Added mcctv notes

markw

10/06/2014

08:58 PM Revision 207 (repo2): Smaller firmware, thanks to Hias

markw

08:56 PM Revision 206 (repo2): Applied patches form Hias - mostly make the firmware smaller. 0001-firmware-read-cartridge-data-in-a-single-chunk. 0002-firmware-get-rid-of-regs.c-this-saves-some-300-bytes 0003-firmware-get-rid-of-libgcc-for-a800-firmware-build

markw

08:51 PM Revision 205 (repo2): To LGPL as discussed

markw

08:51 PM Revision 204 (repo2): Needs some updates, but made a start...

markw

08:41 PM Revision 203 (repo2): Remove extra copyright files

markw

08:40 PM Revision 202 (repo2): Added cartridge instructions

markw

10/05/2014

10:19 PM Revision 201 (repo2): Missing .. for 5200 build

markw

10:13 PM Revision 200 (repo2): Point cartridges at user dir, rather than os rom dir

markw

08:07 PM Revision 199 (repo2): Added mcctv and 5200 builds

markw

03:18 PM Revision 198 (repo2): Merged in first cut cartridge emulation support from Hias. Excellent:-)

markw

02:04 PM Revision 197 (repo2): Ooops... Accidentally commented cart loading on commit!

markw

01:31 PM Revision 196 (repo2): Init fil type properly on real hardware. Static init does not work with linker setup.

markw

11:18 AM Revision 195 (repo2): Merged in cartridge support from Hias. To make space some space improvements were done to freeze and drive emulator. Lots of scope for more

markw

10/03/2014

09:43 PM Revision 194 (repo2): Added missing files from 5200 merge

markw

12:06 AM Revision 193 (repo2): Updated firmware

markw

12:02 AM Revision 192 (repo2): Merged into main firmware dir

markw

10/02/2014

11:59 PM Revision 191 (repo2): Upgraded to v3 of petit fat fs. Should fix 64k file size limit.

markw

11:38 PM Revision 190 (repo2): Fixed 5200 rom addresses and memory clear. On 5200 ROM is currently in base ram area! Also install all zpu roms

markw

11:31 PM Revision 189 (repo2): Started merging in 5200 firmware changes. A800 firmware tested working. 5200 firmware not working, but likely a small fix...

markw

09/28/2014

11:01 PM Revision 188 (repo2): Reconnected the cartrige adaptor - frogger works, nothing else tested!

markw

11:01 PM Revision 187 (repo2): Reconnected the cartrige adaptor - frogger works, nothing else tested!

markw

09:07 PM Revision 186 (repo2): Reconnected pot and keyboard - checked with my old adaptors.

markw

08:43 PM Revision 185 (repo2): Reconnected up the scandoubler on de1. This required sharing the pokey mixer to fix in m4k on de1. Also some work on using better pal/ntsc settings on de1 (not yet working)

markw

01:51 PM Revision 184 (repo2): Patch from Hias to fix case where linked list is not terminated. 0001-fix-directory-reading.patch

markw

01:48 PM Revision 183 (repo2): Patch from Hias for local ncurses output. 0001-initial-version-of-linux-firmware-simulator.patch

markw