Project

General

Profile

Activity

From 10/01/2014 to 10/30/2014

10/30/2014

11:04 PM Revision 239 (repo2): use atari5200 as directory
markw
11:04 PM Revision 238 (repo2): Use atari5200 as sd card directory
markw

10/29/2014

10:38 PM Revision 237 (repo2): Corrected device. Now complaining about one of the spi pins
markw
10:04 PM Revision 236 (repo2): Applying a few interface/file changes
markw
09:50 PM Revision 235 (repo2): Make sures its named 5200 throughout
markw
09:47 PM Revision 234 (repo2): New one stable now pll fixed - deleting old interface version
markw
09:45 PM Revision 233 (repo2): Made sure its 5200 throughout
markw
09:42 PM Revision 232 (repo2): Made the sdcard one the main one - should be stable now with pll fix
markw
09:39 PM Revision 231 (repo2): Fixed pll - its important that the ps2 clock is in sync - i.e. integral factor - with the system clock...
markw

10/28/2014

10:57 PM Revision 230 (repo2): Fix button mappings
markw
10:53 PM Revision 229 (repo2): Some 5200 fixes, reverted to data_io mist interface
markw
10:51 PM Revision 228 (repo2): svn doing stupid stuff
markw
10:50 PM Revision 227 (repo2): sd card version - not working, reverting main version to data_io
markw

10/27/2014

10:50 PM Revision 226 (repo2): Changed to some empirical values that work better with 5200 daptor...
markw

10/26/2014

10:27 PM Revision 225 (repo2): First 5200 stick now working - at least joystick + keypad
markw

10/22/2014

09:21 PM Revision 224 (repo2): SD card fixes, due to how spi_master released cs_n during command. Thanks Till!
markw

10/20/2014

10:45 PM Revision 223 (repo2): Pass s4_n,s5_n and cctl_n through 6502 timing adaptor. Only accept request at start of cycle.
markw

10/19/2014

10:49 PM Revision 222 (repo2): Started to connect up 5200 joystick. On mist this will work with keyboard + analog stick, or 5200daptor
markw
08:57 PM Revision 221 (repo2): Patches from Hias. Fix timing to allow The!Cart to work. Start of PBI work.
markw

10/18/2014

10:47 PM Revision 220 (repo2): Switched mist_5200 to use sd card emulation. NB SD cart emulation does not work yet with this core, but problem identified and Till will be fixing. Thanks Till!
markw
10:46 PM Revision 219 (repo2): Switched to new mmc code a while back, removing old
markw
10:42 PM Revision 218 (repo2): Add a newline, in case there is not a newline at the end of the file
markw

10/17/2014

11:01 PM Revision 217 (repo2): These were cross connected - no idea why it was building. SD init gets further now, but still no dice.
markw
08:12 AM Revision 216 (repo2): As discussed with Till - these were taken under Lesser
markw
08:08 AM Revision 215 (repo2): Changed mist to use simulated sd card, rather than the custom protocol
markw

10/16/2014

09:43 PM Revision 214 (repo2): Upgraded to latest version of Peter Wendrichs core. Thanks Peter!
markw

10/12/2014

10:17 PM Revision 213 (repo2): Fix replay build
markw

10/11/2014

11:34 AM Revision 212 (repo2): Fix PIA store. Checked freezer source, it expects it
markw
10:56 AM Revision 211 (repo2): Allow delete or scroll lock. I found scroll lock did not work on my mist - perhaps my kb
markw
09:55 AM Revision 210 (repo2): Merged turbo freezer support from Hias. Working pretty well. PIA freezing not working yet though, so no joystick after freeze. Scoll lock to freeze.
markw

10/08/2014

08:34 PM Revision 209 (repo2): Added some glue to talk to 6502 style bus with phi1/phi2 etc. Connected to GPIO including phi2 out. VBXE carts not running more reliably. In theory other carts such as The!Cart etc should work now, need to test...
markw
08:33 PM Revision 208 (repo2): Added mcctv notes
markw

10/06/2014

08:58 PM Revision 207 (repo2): Smaller firmware, thanks to Hias
markw
08:56 PM Revision 206 (repo2): Applied patches form Hias - mostly make the firmware smaller. 0001-firmware-read-cartridge-data-in-a-single-chunk. 0002-firmware-get-rid-of-regs.c-this-saves-some-300-bytes 0003-firmware-get-rid-of-libgcc-for-a800-firmware-build
markw
08:51 PM Revision 205 (repo2): To LGPL as discussed
markw
08:51 PM Revision 204 (repo2): Needs some updates, but made a start...
markw
08:41 PM Revision 203 (repo2): Remove extra copyright files
markw
08:40 PM Revision 202 (repo2): Added cartridge instructions
markw

10/05/2014

10:19 PM Revision 201 (repo2): Missing .. for 5200 build
markw
10:13 PM Revision 200 (repo2): Point cartridges at user dir, rather than os rom dir
markw
08:07 PM Revision 199 (repo2): Added mcctv and 5200 builds
markw
03:18 PM Revision 198 (repo2): Merged in first cut cartridge emulation support from Hias. Excellent:-)
markw
02:04 PM Revision 197 (repo2): Ooops... Accidentally commented cart loading on commit!
markw
01:31 PM Revision 196 (repo2): Init fil type properly on real hardware. Static init does not work with linker setup.
markw
11:18 AM Revision 195 (repo2): Merged in cartridge support from Hias. To make space some space improvements were done to freeze and drive emulator. Lots of scope for more
markw

10/03/2014

09:43 PM Revision 194 (repo2): Added missing files from 5200 merge
markw
12:06 AM Revision 193 (repo2): Updated firmware
markw
12:02 AM Revision 192 (repo2): Merged into main firmware dir
markw

10/02/2014

11:59 PM Revision 191 (repo2): Upgraded to v3 of petit fat fs. Should fix 64k file size limit.
markw
11:38 PM Revision 190 (repo2): Fixed 5200 rom addresses and memory clear. On 5200 ROM is currently in base ram area! Also install all zpu roms
markw
11:31 PM Revision 189 (repo2): Started merging in 5200 firmware changes. A800 firmware tested working. 5200 firmware not working, but likely a small fix...
markw
 

Also available in: Atom