Activity
From 10/04/2014 to 11/02/2014
11/02/2014
- 10:56 PM Revision 254 (repo2): Removed delay
- 10:50 PM Revision 253 (repo2): Added file to project
- 10:49 PM Revision 252 (repo2): Better support for cartridges on 5200
- 10:49 PM Revision 251 (repo2): Better cartridge support for 5200
11/01/2014
- 10:49 PM Revision 250 (repo2): Fix pitfall. Was only getting 2/3 values for keycode... My previous implementation seems to match the pokey datasheet but I guess not...
- 10:15 PM Revision 249 (repo2): Changed from pullup to pulldown on unused bus locations on 5200
- 09:56 PM Revision 248 (repo2): Only hold break, shift or control when those keys are being scanned
- 03:03 PM Revision 247 (repo2): Connected PAL signal to scandoubler to allow NTSC palette
- 03:00 PM Revision 246 (repo2): Connect pal siganl to scandoubler - to allow ntsc palette
- 02:55 PM Revision 245 (repo2): Connect pal signal to scandoubler - to allow ntsc palette
- 02:54 PM Revision 244 (repo2): Paddle on mist a800. Added NTSC palette. Added support for 4k and 8k roms to 5200 - need to wire up to cartlogic really...
10/31/2014
- 07:59 PM Revision 243 (repo2): Fixed build error
- 07:58 PM Revision 242 (repo2): Fixed build error
- 07:46 PM Revision 241 (repo2): Firmware changed from using atari5200 to atar5200 - only have 8 characters!
- 06:19 PM Revision 240 (repo2): sd emulation fix - thanks Till
10/30/2014
- 11:04 PM Revision 239 (repo2): use atari5200 as directory
- 11:04 PM Revision 238 (repo2): Use atari5200 as sd card directory
10/29/2014
- 10:38 PM Revision 237 (repo2): Corrected device. Now complaining about one of the spi pins
- 10:04 PM Revision 236 (repo2): Applying a few interface/file changes
- 09:50 PM Revision 235 (repo2): Make sures its named 5200 throughout
- 09:47 PM Revision 234 (repo2): New one stable now pll fixed - deleting old interface version
- 09:45 PM Revision 233 (repo2): Made sure its 5200 throughout
- 09:42 PM Revision 232 (repo2): Made the sdcard one the main one - should be stable now with pll fix
- 09:39 PM Revision 231 (repo2): Fixed pll - its important that the ps2 clock is in sync - i.e. integral factor - with the system clock...
10/28/2014
- 10:57 PM Revision 230 (repo2): Fix button mappings
- 10:53 PM Revision 229 (repo2): Some 5200 fixes, reverted to data_io mist interface
- 10:51 PM Revision 228 (repo2): svn doing stupid stuff
- 10:50 PM Revision 227 (repo2): sd card version - not working, reverting main version to data_io
10/27/2014
- 10:50 PM Revision 226 (repo2): Changed to some empirical values that work better with 5200 daptor...
10/26/2014
10/22/2014
10/20/2014
10/19/2014
- 10:49 PM Revision 222 (repo2): Started to connect up 5200 joystick. On mist this will work with keyboard + analog stick, or 5200daptor
- 08:57 PM Revision 221 (repo2): Patches from Hias. Fix timing to allow The!Cart to work. Start of PBI work.
10/18/2014
- 10:47 PM Revision 220 (repo2): Switched mist_5200 to use sd card emulation. NB SD cart emulation does not work yet with this core, but problem identified and Till will be fixing. Thanks Till!
- 10:46 PM Revision 219 (repo2): Switched to new mmc code a while back, removing old
- 10:42 PM Revision 218 (repo2): Add a newline, in case there is not a newline at the end of the file
10/17/2014
- 11:01 PM Revision 217 (repo2): These were cross connected - no idea why it was building. SD init gets further now, but still no dice.
- 08:12 AM Revision 216 (repo2): As discussed with Till - these were taken under Lesser
- 08:08 AM Revision 215 (repo2): Changed mist to use simulated sd card, rather than the custom protocol
10/16/2014
10/12/2014
10/11/2014
- 11:34 AM Revision 212 (repo2): Fix PIA store. Checked freezer source, it expects it
- 10:56 AM Revision 211 (repo2): Allow delete or scroll lock. I found scroll lock did not work on my mist - perhaps my kb
- 09:55 AM Revision 210 (repo2): Merged turbo freezer support from Hias. Working pretty well. PIA freezing not working yet though, so no joystick after freeze. Scoll lock to freeze.
10/08/2014
- 08:34 PM Revision 209 (repo2): Added some glue to talk to 6502 style bus with phi1/phi2 etc. Connected to GPIO including phi2 out. VBXE carts not running more reliably. In theory other carts such as The!Cart etc should work now, need to test...
- 08:33 PM Revision 208 (repo2): Added mcctv notes
10/06/2014
- 08:58 PM Revision 207 (repo2): Smaller firmware, thanks to Hias
- 08:56 PM Revision 206 (repo2): Applied patches form Hias - mostly make the firmware smaller. 0001-firmware-read-cartridge-data-in-a-single-chunk. 0002-firmware-get-rid-of-regs.c-this-saves-some-300-bytes 0003-firmware-get-rid-of-libgcc-for-a800-firmware-build
- 08:51 PM Revision 205 (repo2): To LGPL as discussed
- 08:51 PM Revision 204 (repo2): Needs some updates, but made a start...
- 08:41 PM Revision 203 (repo2): Remove extra copyright files
- 08:40 PM Revision 202 (repo2): Added cartridge instructions
10/05/2014
- 10:19 PM Revision 201 (repo2): Missing .. for 5200 build
- 10:13 PM Revision 200 (repo2): Point cartridges at user dir, rather than os rom dir
- 08:07 PM Revision 199 (repo2): Added mcctv and 5200 builds
- 03:18 PM Revision 198 (repo2): Merged in first cut cartridge emulation support from Hias. Excellent:-)
- 02:04 PM Revision 197 (repo2): Ooops... Accidentally commented cart loading on commit!
- 01:31 PM Revision 196 (repo2): Init fil type properly on real hardware. Static init does not work with linker setup.
- 11:18 AM Revision 195 (repo2): Merged in cartridge support from Hias. To make space some space improvements were done to freeze and drive emulator. Lots of scope for more
Also available in: Atom