EclaireXL

11/08/2014

11:23 PM Revision 263 (repo2): key control in menu (if connected in core...)

markw

11:23 PM Revision 262 (repo2): key control in menu. escape to exit

markw

11:22 PM Revision 261 (repo2): Press windows key to toggle paddle mode. Press alt to toggle scanlines.

markw

11:21 PM Revision 260 (repo2): Output the next key state, so I can easily trigger on random keypresses

markw

11:21 PM Revision 259 (repo2): Reverse pot direction

markw

11:20 PM Revision 258 (repo2): Added reverse option. Yes, pots are a different direction from cx52!! 2600daptor vs 5200daptor

markw

11:20 PM Revision 257 (repo2): Working on high-res fixes - not yet complete, but still passes acid

markw

11/03/2014

10:44 PM Revision 256 (repo2): Fix shift. I hope this is correct now for both platforms... the pokey.pdf misses some details.

markw

10:42 PM Revision 255 (repo2): Do not clear 2nd pokey - we only have one so this wipes that out...

markw

11/02/2014

10:56 PM Revision 254 (repo2): Removed delay

markw

10:50 PM Revision 253 (repo2): Added file to project

markw

10:49 PM Revision 252 (repo2): Better support for cartridges on 5200

markw

10:49 PM Revision 251 (repo2): Better cartridge support for 5200

markw

11/01/2014

10:49 PM Revision 250 (repo2): Fix pitfall. Was only getting 2/3 values for keycode... My previous implementation seems to match the pokey datasheet but I guess not...

markw

10:15 PM Revision 249 (repo2): Changed from pullup to pulldown on unused bus locations on 5200

markw

09:56 PM Revision 248 (repo2): Only hold break, shift or control when those keys are being scanned

markw

03:03 PM Revision 247 (repo2): Connected PAL signal to scandoubler to allow NTSC palette

markw

03:00 PM Revision 246 (repo2): Connect pal siganl to scandoubler - to allow ntsc palette

markw

02:55 PM Revision 245 (repo2): Connect pal signal to scandoubler - to allow ntsc palette

markw

02:54 PM Revision 244 (repo2): Paddle on mist a800. Added NTSC palette. Added support for 4k and 8k roms to 5200 - need to wire up to cartlogic really...

markw

10/31/2014

07:59 PM Revision 243 (repo2): Fixed build error

markw

07:58 PM Revision 242 (repo2): Fixed build error

markw

07:46 PM Revision 241 (repo2): Firmware changed from using atari5200 to atar5200 - only have 8 characters!

markw

06:19 PM Revision 240 (repo2): sd emulation fix - thanks Till

markw

10/30/2014

11:04 PM Revision 239 (repo2): use atari5200 as directory

markw

11:04 PM Revision 238 (repo2): Use atari5200 as sd card directory

markw

10/29/2014

10:38 PM Revision 237 (repo2): Corrected device. Now complaining about one of the spi pins

markw

10:04 PM Revision 236 (repo2): Applying a few interface/file changes

markw

09:50 PM Revision 235 (repo2): Make sures its named 5200 throughout

markw

09:47 PM Revision 234 (repo2): New one stable now pll fixed - deleting old interface version

markw

09:45 PM Revision 233 (repo2): Made sure its 5200 throughout

markw

09:42 PM Revision 232 (repo2): Made the sdcard one the main one - should be stable now with pll fix

markw

09:39 PM Revision 231 (repo2): Fixed pll - its important that the ps2 clock is in sync - i.e. integral factor - with the system clock...

markw

10/28/2014

10:57 PM Revision 230 (repo2): Fix button mappings

markw

10:53 PM Revision 229 (repo2): Some 5200 fixes, reverted to data_io mist interface

markw

10:51 PM Revision 228 (repo2): svn doing stupid stuff

markw

10:50 PM Revision 227 (repo2): sd card version - not working, reverting main version to data_io

markw

10/27/2014

10:50 PM Revision 226 (repo2): Changed to some empirical values that work better with 5200 daptor...

markw

10/26/2014

10:27 PM Revision 225 (repo2): First 5200 stick now working - at least joystick + keypad

markw

10/22/2014

09:21 PM Revision 224 (repo2): SD card fixes, due to how spi_master released cs_n during command. Thanks Till!

markw

10/20/2014

10:45 PM Revision 223 (repo2): Pass s4_n,s5_n and cctl_n through 6502 timing adaptor. Only accept request at start of cycle.

markw

10/19/2014

10:49 PM Revision 222 (repo2): Started to connect up 5200 joystick. On mist this will work with keyboard + analog stick, or 5200daptor

markw

08:57 PM Revision 221 (repo2): Patches from Hias. Fix timing to allow The!Cart to work. Start of PBI work.

markw

10/18/2014

10:47 PM Revision 220 (repo2): Switched mist_5200 to use sd card emulation. NB SD cart emulation does not work yet with this core, but problem identified and Till will be fixing. Thanks Till!

markw

10:46 PM Revision 219 (repo2): Switched to new mmc code a while back, removing old

markw

10:42 PM Revision 218 (repo2): Add a newline, in case there is not a newline at the end of the file

markw

10/17/2014

11:01 PM Revision 217 (repo2): These were cross connected - no idea why it was building. SD init gets further now, but still no dice.

markw

08:12 AM Revision 216 (repo2): As discussed with Till - these were taken under Lesser

markw

08:08 AM Revision 215 (repo2): Changed mist to use simulated sd card, rather than the custom protocol

markw

10/16/2014

09:43 PM Revision 214 (repo2): Upgraded to latest version of Peter Wendrichs core. Thanks Peter!

markw

10/12/2014

10:17 PM Revision 213 (repo2): Fix replay build

markw

10/11/2014

11:34 AM Revision 212 (repo2): Fix PIA store. Checked freezer source, it expects it

markw

10:56 AM Revision 211 (repo2): Allow delete or scroll lock. I found scroll lock did not work on my mist - perhaps my kb

markw

09:55 AM Revision 210 (repo2): Merged turbo freezer support from Hias. Working pretty well. PIA freezing not working yet though, so no joystick after freeze. Scoll lock to freeze.

markw