EclaireXL

12/14/2014

10:08 PM Revision 305 (repo2): Fixed GPIO pin names. Changed SDC case to match file.

markw

09:48 PM Revision 304 (repo2): Arg

markw

09:46 PM Revision 303 (repo2): Connected scandoubler

markw

09:31 PM Revision 302 (repo2): First sockit build. Not tested, no sound, no ddr3, etc. No zpu, but the idea is to have an avalon mm interface to control the Atari instead from Linux...

markw

12/13/2014

10:35 PM Revision 301 (repo2): Use right windows key for fire

markw

10:02 PM Revision 300 (repo2): Added mcc 5200 builds

markw

10:01 PM Revision 299 (repo2): RGBHV buils

markw

10:00 PM Revision 298 (repo2): Keyboard as joystick1. Escape to exit menu. Disable keyboard gpio when gpio off!

markw

08:19 PM Revision 297 (repo2): Key support in menu

markw

08:00 PM Revision 296 (repo2): Fix for hscrol and mode 8

markw

02:03 PM Revision 295 (repo2): Direct mode for control by usb firmware. Added mapping for 2nd, 3rd and 4th keypads. 2nd is on f4 to f6 etc, 3rd is as 1st but with control. 4th is as 2nd but with control.

markw

01:54 PM Revision 294 (repo2): Added 5200 mcc builds

markw

01:54 PM Revision 293 (repo2): Added USB support

markw

01:54 PM Revision 292 (repo2): Added usb polling

markw

01:53 PM Revision 291 (repo2): Connect some signals used by svideo

markw

01:53 PM Revision 290 (repo2): Add RGB builds without composite sync - for people with external sync combining hardware confused by composite sync

markw

01:50 PM Revision 289 (repo2): Changed from SVIDEO to COMPOSITE

markw

01:50 PM Revision 288 (repo2): 5200 core port to mcctv/mcc216

markw

01:47 PM Revision 287 (repo2): MCC 5200 firmware

markw

12/11/2014

10:36 PM Revision 286 (repo2): MCC controller custom mapping

markw

10:36 PM Revision 285 (repo2): Share the USB PS2 override logic. Wire up USB to controllers on the MCC216

markw

12/07/2014

11:28 PM Revision 284 (repo2): Missing entry in process sensitivity list

markw

11:27 PM Revision 283 (repo2): Capture SIO commands using a hardware state machine - too time critical to easily merge with USB polling otherwise (without much code refactoring...). Now drive emulation works on MCCTV with USB:)

markw