EclaireXL

04/06/2015

02:04 PM Revision 349 (repo2): Fix 480i interlace. Vsync needs to be on exactly the right row, also the AN2 must be disabled by clearing bits 0 or 1 on dmactl.

markw

04/04/2015

11:50 PM Revision 348 (repo2): Added Drive turbo selection. Fixed a few builds. Added which target is building to output. Run up to 3 jobs at once during build.

markw

03:04 PM Revision 347 (repo2): Run 2 jobs at once

markw

02:45 PM Revision 346 (repo2): Split the concept of hsync, vsync and composite sync. When composite sync used tie vsync high. The offset hsync pulse of pal/hsync is only present for 15khz composite sync. Remove rom selection since its unused.

markw

02:38 PM Revision 345 (repo2): fix sockit path

markw

03/27/2015

11:09 PM Revision 344 (repo2): Scanlines were broken by last change (were alternating each frame)

markw

09:19 PM Revision 343 (repo2): Do not background - not got enough ram here

markw

09:13 PM Revision 342 (repo2): Added RGBHV

markw

02:42 PM Revision 341 (repo2): Latest firmware and added papilio duo to build scripts

markw

02:38 PM Revision 340 (repo2): Add weak pull-ups on data lines for cartridge/pbi

markw

02:23 PM Revision 339 (repo2): Allow 64k carts to work. Switch keyboard to PS2 port 2.

markw

03/26/2015

11:18 PM Revision 338 (repo2): Changed mem addresses

markw

11:17 PM Revision 337 (repo2): The banks have a hole from 64k-256k, use this for the os rom, freeze and directory cache

markw

11:04 PM Revision 336 (repo2): papilio duo support

markw

11:03 PM Revision 335 (repo2): Switched DAC

markw

09:55 PM Revision 334 (repo2): Aded papilio duo

markw

09:55 PM Revision 333 (repo2): Added low memory type 2 - for papilio and its 512k

markw

09:55 PM Revision 332 (repo2): Resync output to input hsync

markw

09:54 PM Revision 331 (repo2): Added multiple build types

markw

12:53 PM Revision 330 (repo2): Added 32 bit sram access to make zpu work

markw

03/18/2015

11:07 PM Revision 329 (repo2): fixed ucf use

markw

11:05 PM Revision 328 (repo2): sram works, boots, keyboard works

markw

09:40 PM Revision 327 (repo2): Fixed PLL to more appropriate for PAL/NTSC with he 32MHz input clock. Should work now, although no ZPU yet!

markw

09:18 PM Revision 326 (repo2): replacing with pal/ntsc plls of correct input frequency

markw

03/17/2015

11:19 PM Revision 325 (repo2): First cut of papilio duo support. NB: This does not work yet, notably PLL needs changing. Then sram needs wiring up to allow zpu to run.

markw

03/15/2015

04:08 PM Revision 324 (repo2): Added inferred multiplier

markw

04:08 PM Revision 323 (repo2): EDBLL apparently works with lower drive strength - there are some crosstalk issues I read. Added GPIO lower drive strength. Removed 25ohm resistors.

markw

04:03 PM Revision 322 (repo2): Now builds ok - disabled some features to fit in device. Also optimised pokey mixer.

markw

04:00 PM Revision 321 (repo2): Space reduction to fit onto a Spartan 6 LX9. Allow disabling stereo and covox. Also replace pokey non-linear table with a piecewise linear function rather than a LUT

markw