Activity
From 03/18/2015 to 04/16/2015
04/16/2015
- 11:39 PM Revision 355 (repo2): Do not disable AVR, having it reset screws things up. Switch PS2 back to port1. Add LEDs for SIO state.
- 10:54 PM Revision 354 (repo2): Infer a multipler for pokey lookup
- 10:53 PM Revision 353 (repo2): Added synchronizer
04/08/2015
- 07:59 AM Revision 352 (repo2): Reverted antic highres "fixes" that break numen. circa r256/257
- 07:58 AM Revision 351 (repo2): Simple memory saving support - to help debugging
- 07:58 AM Revision 350 (repo2): Simple memory saving support - to help debugging
04/06/2015
04/04/2015
- 11:50 PM Revision 348 (repo2): Added Drive turbo selection. Fixed a few builds. Added which target is building to output. Run up to 3 jobs at once during build.
- 03:04 PM Revision 347 (repo2): Run 2 jobs at once
- 02:45 PM Revision 346 (repo2): Split the concept of hsync, vsync and composite sync. When composite sync used tie vsync high. The offset hsync pulse of pal/hsync is only present for 15khz composite sync. Remove rom selection since its unused.
- 02:38 PM Revision 345 (repo2): fix sockit path
03/27/2015
- 11:09 PM Revision 344 (repo2): Scanlines were broken by last change (were alternating each frame)
- 09:19 PM Revision 343 (repo2): Do not background - not got enough ram here
- 09:13 PM Revision 342 (repo2): Added RGBHV
- 02:42 PM Revision 341 (repo2): Latest firmware and added papilio duo to build scripts
- 02:38 PM Revision 340 (repo2): Add weak pull-ups on data lines for cartridge/pbi
- 02:23 PM Revision 339 (repo2): Allow 64k carts to work. Switch keyboard to PS2 port 2.
03/26/2015
- 11:18 PM Revision 338 (repo2): Changed mem addresses
- 11:17 PM Revision 337 (repo2): The banks have a hole from 64k-256k, use this for the os rom, freeze and directory cache
- 11:04 PM Revision 336 (repo2): papilio duo support
- 11:03 PM Revision 335 (repo2): Switched DAC
- 09:55 PM Revision 334 (repo2): Aded papilio duo
- 09:55 PM Revision 333 (repo2): Added low memory type 2 - for papilio and its 512k
- 09:55 PM Revision 332 (repo2): Resync output to input hsync
- 09:54 PM Revision 331 (repo2): Added multiple build types
- 12:53 PM Revision 330 (repo2): Added 32 bit sram access to make zpu work
03/18/2015
- 11:07 PM Revision 329 (repo2): fixed ucf use
- 11:05 PM Revision 328 (repo2): sram works, boots, keyboard works
- 09:40 PM Revision 327 (repo2): Fixed PLL to more appropriate for PAL/NTSC with he 32MHz input clock. Should work now, although no ZPU yet!
- 09:18 PM Revision 326 (repo2): replacing with pal/ntsc plls of correct input frequency
Also available in: Atom