EclaireXL

05/29/2018

10:07 PM Bug #64: Pokey pdm timing incorrect

Tried a 1 cycle and a half cycle delay on the input to the xor. Neither are seeming quite right, but 1 cycle delay is... foft

08:21 PM Bug #64: Pokey pdm timing incorrect

Phaeron got a scope on it:
http://atariage.com/forums/topic/244946-using-pulse-density-modulation-for-8-bit-pcm/page... foft

05/28/2018

09:52 PM Bug #66: Odd flash behaviour on new boards

Gathering ids on other boards in case I need to switch on that: [[Flash_chip_by_board]] foft

09:49 PM Bug #6: HDMI audio poor quality

# Is the time between this always the same? If so can dIs the sound quality poor because I removed the divide?
# If ... foft

05/26/2018

09:11 PM Bug #66 (Closed): Odd flash behaviour on new boards

Ensure that the new flash chip is stable with the existing firmware strategy. It has some hybrid 64k/4k sector option... foft

05/25/2018

06:31 AM Feature #65: Implement ATA to SPI bridge

Above was info from flashjazzcat on the forum foft

06:30 AM Feature #65: Implement ATA to SPI bridge

I need to prepare a document outlining the minimum requirements of IDE emulation since I'm explaining the same thing ... foft

05/24/2018

08:52 PM Feature #65: Implement ATA to SPI bridge

foft wrote:
> There is plenty of software for the Atari which accesses ATA hard drives via a simple register interfa... sadosp

08:44 PM Feature #65 (New): Implement ATA to SPI bridge

There is plenty of software for the Atari which accesses ATA hard drives via a simple register interface. Find out wh... foft

05/13/2018

10:04 PM Bug #64 (Closed): Pokey pdm timing incorrect

See
http://atariage.com/forums/topic/244946-using-pulse-density-modulation-for-8-bit-pcm/page-3#entry4025673
So w... foft