Activity

From 02/18/2020 to 03/18/2020

10:32 PM Feature #85: 720p support/1080i support: Checked on the ram block input/output when built with 32KB and 64KB.
Same input, same mif, different output...
Chec... foft

11:10 PM Feature #85: 720p support/1080i support: Tried to upgrade from Quartus 18.0 to 19.1. Same issue. foft
10:28 PM Feature #85: 720p support/1080i support: Problem is with E8:
002020100112
bit 20 == high = opcStackUp.
This isn't what is in the constant table, so not c... foft

10:57 PM Feature #85: 720p support/1080i support: Its opcodeInfoTable that is getting put into altsyncram. Not sure why its invalid yet. I'm trying the ramstyle attrib... foft
10:28 PM Feature #85: 720p support/1080i support: with 32k, the block is not shared. I guess something is accessing memory where it shouldn't... foft
10:04 PM Feature #85: 720p support/1080i support: M10K is shared:
atari800core:atari800|cpu:cpu6502|cpu_65xx:cpu_6502_peter|altsyncram:Mux54_rtl_0|altsyncram_ag91:aut... foft
10:03 PM Feature #85: 720p support/1080i support: with 64k
atari800core:atari800|cpu:cpu6502|cpu_65xx:cpu_6502_peter|altsyncram:Mux54_rtl_0|altsyncram_ag91:auto_gener... foft
09:54 PM Feature #85: 720p support/1080i support: I guess related to the opcinfo storage somehow. with 32k get this:
atari800core:atari800|cpu:cpu6502|cpu_65xx:cpu_65... foft
09:52 PM Feature #85: 720p support/1080i support: On v1 its all working, with 32K block ram as system ram. Once I put it to 64K block ram as system ram (which JUST fit... foft

09:23 PM Revision 985 (repo2): Remove reset of hdmi on atari reset: markw
09:22 PM Revision 984 (repo2): Register mux output to meet timing (well, closer) on the hdmi. Remove reset of hdmi on reset, as on v2: markw
09:21 PM Revision 983 (repo2): Split inout into in and out for i2c, better for internal use in fpga: markw
09:21 PM Revision 982 (repo2): Split inout into in and out for i2c, better for internal use in fpga: markw

10:23 PM Feature #85: 720p support/1080i support: Got this merged down to svn and also v1 and v3 building.
Was hanging on purely internal i2c. Changed master and sl... foft

10:24 PM Revision 981 (repo2): SDC file correction for v1: markw
10:09 PM Revision 980 (repo2): I2C registers, for the scaler config: markw
09:32 PM Revision 979 (repo2): Add area scaler to A2 v1 and v3 boards. Add both scalers to the A4 v3 board.: markw

10:39 PM Revision 978 (repo2): A4 has room for both scalers: markw
10:38 PM Revision 977 (repo2): Few missing parts from scaler support for v2: markw
10:06 PM Revision 976 (repo2): Updated sdc for new clocks: markw
10:04 PM Revision 975 (repo2): Added videomodes to the jic: markw
10:03 PM Revision 974 (repo2): DVI mode support: 480i/576i/720p and 1080i: markw
09:51 PM Revision 973 (repo2): Add video mode rom to flash: markw
09:51 PM Revision 972 (repo2): Create standard video mode rom: markw
09:47 PM Revision 971 (repo2): Add support for 480i/576i,720p and 1080i: markw

Also available in: Atom

EclaireXL