Project

General

Profile

Actions

Flashing using the USB blaster » History » Revision 2

« Previous | Revision 2/5 (diff) | Next »
foft, 05/27/2018 07:12 PM


Flashing using the USB blaster

Its possible to flash the .sof using the USB blaster, but this only lasts until the board is restarted.
To do this:
#Connect power to the board
#Connect the jtag
#In quartus go to tools->programmer
#In the programmer select 'add file' and choose the .sof file
#Tell it to start

To store on the flash chip you need to make a .jic file. The v1 board has a chip compatible with the EPCQ128. The v3 board has a chip compatible with the EPCS128.

Updated by foft over 6 years ago · 2 revisions