Project

General

Profile

Wiki » History » Revision 41

Revision 40 (foft, 05/27/2018 07:37 PM) → Revision 41/58 (foft, 05/27/2018 07:38 PM)

h1. Introduction 

 For now please see the general core manual on the main page. 
 http://www.64kib.com/ 

 h1. Power requirements 

 USB B 5V input. 500mA is enough but I'd go with 1-2A to give some extra for any connected devices. 

 [[Known good power supplies]] 

 h1. Board setup videos 

 I put together some basic videos for the v2 boards: 
 https://www.youtube.com/playlist?list=PLYGeDt6lv-p5R4DwdcHtmYUbfL6lOcYLb 

 h1. SD card setup 

 The OS and basic rom are loaded from the flash chip in the new cores, this can still be overridden by the sd card as discussed here: 
 http://www.64kib.com/redmine/boards/1/topics/22?r=26#message-26 

 h1. Updating the core 

 [[Flashing overview]] 
 [[Core location]] 
 [[Flashing using the USB blaster]] 
 [[Flashing using the SD card]] 
 [[Converting flashing files]] 

 h1. Svideo/composite on v2 

 On the v2 board svideo and composite are output via the vga connector: 

 For svideo luma is on the green output and chroma on the blue output. 
 For composite luma is on the green output.  

 h1. Board information 

 [[Pinouts]] 
 [[V2Issues]] 

 h1. Cases 

 In theory any mini ITX case should work as long as it has a full size IO panel. 

 In practice, please check this list of [[known good cases]]. If you have success with another one, please add it. 

 h1. Keyboard mapping 

 The keyboard is mapped to match the standard Atari keyboard layout. It assumes you are using either an ISO or ANSI keyboard. I highly recommend buying stickers from here: https://www.4keyboard.com/commodore/591-2840-commodore-atari-non-transparent-keyboard-stickers.html 
 For an ISO keyboard: 
 !http://www.64kib.com/autobuild/keyboard.JPG!