Activity

From 05/05/2018 to 06/03/2018

08:35 PM Bug #6: HDMI audio poor quality: Investigating resampling high frequencies to 48KHz with some plots in Octave. The average that I removed wasn't a bad... foft
11:21 AM Feature #68 (Closed): Implement stock Atari 800 mode: It would be great to have the option of using NTSC, OS-B and 48K to reflect an unmodified Atari 800. There are also o... Farb

10:15 PM Bug #31: HDMI Audio generate high pitch noise (Core 8): HDMI audio is sounding better now in general (signed/unsigned). This high pitched noise is still heard in some cases ... foft
08:27 PM Bug #66: Odd flash behaviour on new boards: Flashing a new PDM is very clear that the board is erasing in 64KB blocks. That does not explain the core corruption ... foft
08:01 PM Bug #6: HDMI audio poor quality: The biggest issue with this appears to be that I need to send signed samples. Changed that and its sounding much better. foft

10:46 AM Bug #64 (Closed): Pokey pdm timing incorrect: Seems to run fine, Acid now passes again as far as I can tell. admin
08:24 AM Bug #64: Pokey pdm timing incorrect: Been checking on the scope. The one cycle delay looks correct.
Some jitter issues due to when I activate pokey. I wa... foft
10:42 AM Bug #67 (Resolved): Pokey two tone timing problem: An old bug.. See http://atariage.com/forums/topic/228527-pokey-emulation/page-3#entry3060595
10 P=53760
20 POKE P... admin

10:07 PM Bug #64: Pokey pdm timing incorrect: Tried a 1 cycle and a half cycle delay on the input to the xor. Neither are seeming quite right, but 1 cycle delay is... foft
08:21 PM Bug #64: Pokey pdm timing incorrect: Phaeron got a scope on it:
http://atariage.com/forums/topic/244946-using-pulse-density-modulation-for-8-bit-pcm/page... foft

09:52 PM Bug #66: Odd flash behaviour on new boards: Gathering ids on other boards in case I need to switch on that: [[Flash_chip_by_board]] foft
09:49 PM Bug #6: HDMI audio poor quality: # Is the time between this always the same? If so can dIs the sound quality poor because I removed the divide?
# If ... foft

09:11 PM Bug #66 (Closed): Odd flash behaviour on new boards: Ensure that the new flash chip is stable with the existing firmware strategy. It has some hybrid 64k/4k sector option... foft

06:31 AM Feature #65: Implement ATA to SPI bridge: Above was info from flashjazzcat on the forum foft
06:30 AM Feature #65: Implement ATA to SPI bridge: I need to prepare a document outlining the minimum requirements of IDE emulation since I'm explaining the same thing ... foft

08:52 PM Feature #65: Implement ATA to SPI bridge: foft wrote:
> There is plenty of software for the Atari which accesses ATA hard drives via a simple register interfa... sadosp
08:44 PM Feature #65 (New): Implement ATA to SPI bridge: There is plenty of software for the Atari which accesses ATA hard drives via a simple register interface. Find out wh... foft

10:04 PM Bug #64 (Closed): Pokey pdm timing incorrect: See
http://atariage.com/forums/topic/244946-using-pulse-density-modulation-for-8-bit-pcm/page-3#entry4025673
So w... foft

Also available in: Atom

EclaireXL