Activity
From 06/12/2017 to 07/11/2017
07/10/2017
- 09:35 PM Developer: RE: USB AB Connector
- By mistake, the pin should be removed.
- The internal USB connector has all the pins wired but most USB panel connectors have the last pin in the bottom row p...
- 04:42 AM Developer: RE: On Off Controller by Maxim
- Yes I think that using these two ic's we cover both cases.
07/08/2017
- 08:01 AM Developer: RE: Atari 400-style key caps just back from WASD!
- I need to do something about the firmware soon, there are about 4 bytes free! Of course we have plenty of resources b...
- 03:30 AM Developer: RE: Atari 400-style key caps just back from WASD!
- ...
- 07:58 AM Developer: RE: On Off Controller by Maxim
- So we'd have this instead of the toggle switch? Then a tps63002 for the stable 5V?
Guess it would be good to have ... - On Off Controller by Maxim, which can be used as on off switch, using a momentary switch. This can be handle a relay ...
07/07/2017
- 11:12 PM Developer: RE: Atari 400-style key caps just back from WASD!
- Excellent job! Although I like very much the key-caps, I would prefer a more chocolate version for the main keyboard!...
- 09:13 AM Developer: RE: Atari 400-style key caps just back from WASD!
- It won't be an issue, once the keyboard layout in Eclaire can be configured.
07/06/2017
- 03:45 PM Developer: RE: Atari 400-style key caps just back from WASD!
- What about that one? That's a PC keyboard, mine is designed specifically for the EclaireXL keyboard layout.
- 12:40 PM Developer: RE: Atari 400-style key caps just back from WASD!
- This is the correct one.
- 12:40 PM Developer: RE: Atari 400-style key caps just back from WASD!
- Sorry, wrong image :(
- 12:40 PM Developer: RE: Atari 400-style key caps just back from WASD!
- What about this one?
07/05/2017
- 12:10 AM Developer: RE: Atari 400-style key caps just back from WASD!
- Beautiful keyboard!
07/04/2017
- 07:25 PM Developer: RE: Atari 400-style key caps just back from WASD!
- Backlit too. Your one looks far better than the one on Amazon!
- 05:20 PM Developer: RE: Atari 400-style key caps just back from WASD!
- Thanks. The actual keyboard is a Velocifire TKL-01, it runs about $30 from Amazon. It is painted using Krylon camouf...
- 07:02 AM Developer: RE: Atari 400-style key caps just back from WASD!
- Cool! That looks amazing:)
What is the keyboard that you fitted the keycaps too? Seems to match the 800 case. - Here is a couple of pictures of my key caps based on the Atari 400. I just received them today from WASD...
!http:...
07/02/2017
- 11:39 AM Developer: RE: new video uploaded
- HDMI, dvi and vga mode are 50Hz (HDMI is picky) other modes are 49.86Hz like the Atari. Nir tell me it's still faster...
- 10:41 AM Developer: RE: new video uploaded
- It seems to me that at the beginning Eclair is a little bit late but at the end of demo is ahead of the atari.
07/01/2017
- 04:25 PM Developer: RE: How to check core version?
- I guess I can include svn revision, though will need to find some bytes in the firmware:-) & commit code first!
- 01:47 PM Developer: RE: How to check core version?
- Please add such information on the settings screen.
- 10:13 AM Developer: RE: new video uploaded
- Great Video nir... If I had your Video talents I would never have time for my Atari 8bits.
06/29/2017
- 09:40 PM Developer: RE: new video uploaded
- *+1* from me !
- 08:05 PM Developer: RE: new video uploaded
- Thanks Nir, great video as always:)
- https://www.youtube.com/watch?v=7wHHSnh7MHo
- 08:05 PM Developer: RE: Holy shit - Joe Decuir has en Eclaire
- Yes it's true, Joe has one and will be helping out as time allows.
- Joe Decuir posted a response to Nir's video https://www.youtube.com/watch?v=7wHHSnh7MHo
Amazing news!! - 06:22 PM Developer: RE: Which case are you getting?
- i got a clear case for the Eclaire
06/21/2017
- 07:53 PM Developer: RE: How to check core version?
- I don't have a method for this yet, but yeah would be useful.
The closest right now would be to read the flash chi... - This would be useful.
06/15/2017
- 02:27 PM Developer: RE: Tested PBI devices thread
- foft wrote:
> External sio or the internal drives?
>
> I'm aware of some internal sio drive issues, seems to get ... - 07:51 AM Developer: RE: Tested PBI devices thread
- External sio or the internal drives?
I'm aware of some internal sio drive issues, seems to get stuck in a bad state. - 07:47 AM Developer: RE: Demoing Eclaire
- Yeah, exciting. I'd also like to see pictures. So far mine only made it as far as the local makers club.
- 06:18 AM Developer: RE: Demoing Eclaire
- looking forward for the pictures :)
- I just wanted to post and let you guys know, that I will be taking my Eclaire to a computer show on June 24th. A gro...
06/14/2017
- 11:12 PM Developer: RE: SIO devices which use clockin/clock out?
- I thought about that but these are pretty rare and somewhat valuable so I am reluctant to mod it.
- 10:09 PM Developer: RE: SIO devices which use clockin/clock out?
- sadosp wrote:
> 917k wrote:
> > Okay, so my Alien Group Voice Box is not going to work then, it is an earlier versi... - 09:25 PM Developer: RE: SIO devices which use clockin/clock out?
- 917k wrote:
> Okay, so my Alien Group Voice Box is not going to work then, it is an earlier version without the exte... - 07:27 AM Developer: RE: SIO devices which use clockin/clock out?
- Okay, so my Alien Group Voice Box is not going to work then, it is an earlier version without the external power jack.
- 07:03 AM Developer: RE: SIO devices which use clockin/clock out?
- No, 12v is not connected. Didn't seem worth a regulator for that.
- 03:28 AM Developer: RE: SIO devices which use clockin/clock out?
- So does pin 12 of the SIO jack carry +12v as it does on the 400/800?
- 10:07 PM Developer: RE: Tested PBI devices thread
- foft wrote:
> Thanks, very helpful. I'm pleased the MIO seems to be working too so far. Adjusting the PCB by a coupl... - 09:01 PM Developer: RE: Tested PBI devices thread
- Thanks, very helpful. I'm pleased the MIO seems to be working too so far. Adjusting the PCB by a couple of mm seems o...
- 12:02 AM Developer: RE: Tested PBI devices thread
- Confirmed. 4.75mm gap and the MIO plugs in fine. I do not have a drive to test it with, but hitting SELECT+RESET br...
- 09:25 PM Developer: RE: F10 and cartridge selected behavior
- Actually I was hoping someone could pick up firmware development so I can work on the hardware...
- 09:21 PM Developer: RE: F10 and cartridge selected behavior
- 917k wrote:
> What do you think about having it automatically unload an existing cartridge if a new one is selected... - 08:58 AM Developer: RE: F10 and cartridge selected behavior
- Thanks Panos, that works. What do you think about having it automatically unload an existing cartridge if a new one i...
- 07:45 AM Developer: RE: V14 - Changes?
- There is a file called 'changes' in the same folder.
I had the paddles wired up in the wrong order. - 03:15 AM Developer: RE: Custom keyboard designs for EclaireXL
- Thank you. It is fun doing these, although they do take a while to put together. I'm going to have the 400 set made...
06/13/2017
- 11:33 PM Developer: RE: Tested PBI devices thread
- The connector looks like it requires 4.75mm, and the PCB has about 3.7. I will file this opening larger so that I ca...
- 11:01 PM Developer: RE: Tested PBI devices thread
- I was attempting to test my MIO, but unfortunately, the PBI cable on the MIO will not fit the daughter board. I will...
- Please add tested devices here, along with their status
I'll start it off with the ones I have.
board,core,devi... - Is there a list of what changed between core 13, and 14?
- 10:47 PM Developer: RE: Custom keyboard designs for EclaireXL
- Both designs are beautiful. I've been using a WASD Code keyboard (Cherry Green, white LED backlight) for a long time...
06/12/2017
- 10:29 PM Developer: RE: Custom keyboard designs for EclaireXL
- 917k wrote:
> Here is a mock-up of the custom keyboard I have designed for the EclaireXL based on the Atari 400...
... - 08:33 PM Developer: RE: Custom keyboard designs for EclaireXL
- Not that I know of, although that thought did cross my mind as well.
- 08:26 PM Developer: RE: Custom keyboard designs for EclaireXL
- Can they make some kind of 'flat covers' for the ones we aren't using?
- 08:17 PM Developer: RE: Custom keyboard designs for EclaireXL
- My plan is to have keycaps made at the WASD site. I verified that they can do full-color (like the 400 design) printi...
- 08:14 PM Developer: RE: Custom keyboard designs for EclaireXL
- Another mock-up, this time showing my XE styled keyboard design...
!http://i275.photobucket.com/albums/jj282/gulfr... - 08:11 PM Developer: RE: Custom keyboard designs for EclaireXL
- Nice!
I'd be tempted to put freezer somewhere it won't be pressed by mistake. Do we need paddle mode?
So these ... - Here is a mock-up of the custom keyboard I have designed for the EclaireXL based on the Atari 400...
!http://i275.... - 10:15 PM Developer: RE: SIO devices which use clockin/clock out?
- foft wrote:
> I added support here in the latest core and this works for Nir. Could you check too please?
One of ... - 08:34 PM Developer: RE: SIO devices which use clockin/clock out?
- I added support here in the latest core and this works for Nir. Could you check too please?
- 08:08 PM Developer: RE: Keyboard
- Hi, I'm alive! Just sleeping then working.
Yeah we can do all of that. Steve, did you understand the replies I sen... - 04:07 PM Developer: RE: Keyboard
- Mark!!!
Are you there to respond please?
Also available in: Atom