EclaireXL

02/06/2018

09:38 PM Feature #7: Implement I2C vga/hdmi support

Looking on signaltap looks like slave reads of the control register are not working. Hmmm. foft

09:36 PM Feature #7: Implement I2C vga/hdmi support

Picoscope has i2c debugging and linux drivers:-) Installed them and will connect that up and take a look tomorrow. foft

09:28 PM Feature #7: Implement I2C vga/hdmi support

Writing some code to say:
select channel1
read selected channel
write to random slave on channel1
select chan... foft

09:15 PM Feature #15: Implement programmable PLL

foft wrote:
> OK, confirmed this chip is working. I programmed it over i2c and am now getting two different clocks o... sadosp

08:49 PM Feature #15: Implement programmable PLL

OK, confirmed this chip is working. I programmed it over i2c and am now getting two different clocks output on CLK0 a... foft

02/05/2018

09:58 PM Feature #15: Implement programmable PLL

Been adding i2c to the zpu. Mostly working I think, a few timing issues to solve. foft

02/04/2018

09:59 PM Feature #15: Implement programmable PLL

To do this I need to add i2c support to the ZPU. I'm out of ROM space without easy fixes. There is actually quite a l... foft

09:24 PM Feature #15: Implement programmable PLL

Going to power this up urgently before new boards made, to check hardware side is fine. admin

09:23 PM Feature #15: Implement programmable PLL

Attached the note on how to program manually (without clock builder help) foft

09:22 PM Feature #15: Implement programmable PLL

Attached header file for programming clk0->10MHz and clk1->30MHz.
These are generated with clock builder pro, down... foft

09:25 PM Feature #7: Implement I2C vga/hdmi support

Going to at least check this chip is wired properly before the new boards are ordered admin

09:24 PM Bug #18 (Closed): Power on Switch

Panos fixed this for the next run admin

02/02/2018

10:30 PM v17 out and new boards

The high-res antic work is still ongoing but I think this is now stable enough for general use.
* High res antic s... foft

01/14/2018

11:12 AM Feature #3: High resolution antic support

So antic output looks near perfect. Some blue blobs on the left which I need to investiate. The shift register is cle... foft

11:11 AM Feature #3: High resolution antic support

Still not onto GTIA! Doing some debugging on the non display parts of antic output. Improved my visualation tools to ... foft

01/09/2018

09:26 PM Meltdown

I upgraded my server for the meltdown patch and my hard drive took the opportunity to die. So that was fun...
Not ... foft

08:54 PM Feature #2 (Closed): PBI support

Closing, seems to be working well. At least on all the devices I have! foft

08:51 PM Feature #26 (Closed): PS/2 keyboard

These adaptors are just wiring. The keyboard detects if it works in USB or PS2 mode. It can be that the keyboard dete... foft

08:48 PM Bug #45 (Closed): CORE10 - IDE2+ SDX not working

Closed since Nir confirmed this behavior on original hardware foft

08:45 PM Bug #43 (Closed): Core 10 - IDE2+ Menu does not show when powering the computer with START key pressed

Marking as closed since the IDE2+ itself seems to work. Would be nice to test the black box and MIO but if someone do... foft